Inslogic PETG Pro – 1 kg

Inslogic PETG Pro 1.75 mm filament. One 1 kg roll with spool, unopened and boxed. Select your color.

Material details

PETG Pro offers toughness, stiffness and a lower-sheen finish than standard PETG. Suggested uses include functional prototypes, fixtures, electronics housings and larger prints.

Filament diameter: 1.75 mm ±0.02 mm. Net filament weight: 1 kg, supplied with spool. Compatible with FDM printers that use 1.75 mm filament; Inslogic lists Bambu Lab AMS compatibility.

Manufacturer recommended print settings

Nozzle: 230–240°C at 50–100 mm/s; 240–255°C at 100–300 mm/s; 255–270°C at 300–600 mm/s.

Heated bed: 60–70°C. Cooling fan: 100%. Suggested surfaces: smooth PEI or high-temperature plate. Nozzle sizes: 0.2, 0.4 or 0.6 mm.

Drying: 55°C for 4 hours. Inslogic recommends drying before printing and moisture protection during prints longer than 6 hours. Store cool, dry and resealed.

These are manufacturer starting ranges. Tune for your printer, build surface and model; advertised speeds depend on your printer’s capabilities.

Source: Inslogic PETG Pro product page — https://store.inslogic3d.com/products/petg-pro-filament